Dishwasher Not Draining? Try these 3 Tips from Appliance Rescue Service

The dishwasher is a workhorse in the kitchen, and we frequently forget how much we use it until it’s broken. When you find your dishwasher not draining, it can be a huge inconvenience, not to mention a stinky mess!

 

Appliance Rescue Service – the best appliance repair company in Dallas, Texas – is happy to offer these 3 simple solutions to fixing your dishwasher issues without a costly dishwasher repair:

 

Solution #1: Clean the Filters

When was the last time you cleaned the filters in your dishwasher? As a good rule of thumb, it’s smart to rinse them each time you refill the drying agent. At any rate, a clogged dishwasher filter can cause a dishwasher not to drain. Take them out and rinse them thoroughly with soap and water to see if it solves the issue.

 

Solution #2: Check the Connections

After turning off the power to the unit, remove the toe-kick panel from the bottom of the dishwasher. Inspect the connections thoroughly to see if anything is loose or corroded around the drain hose connection, valve bracket, and drain hose clamp. The valve bracket should actually move and rotate freely, so if it doesn’t, then you likely have a burned out electrical solenoid.

 

Solution #3: Clear the Drain Hose, Disposal, & Sink Drain

This one is usually the #1 culprit. Something has clogged the line and you need to clear it. Disconnect the drain hose. Next, try to blow air through it to see if there is a clog or kink. Clogs can also originate with the disposal and sink drain since many dishwashers drain through the sink drain. One solution to clearing a sink drain or disposal clog is to run hot water through it.

 

If none of the above solutions fix your issue and your dishwasher is not draining, call Appliance Rescue Service! We provide the highest quality appliance repair in the Dallas-Fort Worth Metroplex, serving nearly every zip code. Call us today with all your dishwasher repair needs!

dishwasher not draining